Bio-Base Mold Urethane
Tough Coating Using Soybeans, Renewable Source
Rhino Hyde® Bio-Spray™ is newly developed spray coating material is designed to coat a variety of surfaces for physical and chemical protection. This 100% solid elastomeric coating material provides superior protection against scratch, cut, tear, and abrasion. Its primary use is known as truck-bed liner. However, this highly engineered material can also be used in number of other applications. It contains polymer chemicals derived from soybeans, which are grown and processed in the Heart of America, the Midwest United States.
Properties of the Coating
This coating material has:
 |
Excellent cut/tear and abrasion resistance properties |
|
|
Excellent chemical resistance properties |
|
|
Excellent water resistance property |
|
|
Excellent corrosion resistance property |
|
Property |
ASTM Number |
Typical Value |
|
Hardness |
ASTM D2240 |
D 53 |
|
Tensile Strength |
ASTM D412 |
2650 psi |
|
Ultimate Elongation |
ASTM D412 |
108 % |
|
Die-C Tear Strength |
ASTM D624 |
499 pli |
| Sprit Tear Resistance | ASTM D624 | 144 pli |
|
Abrasion Resistance |
ASTM D4060 |
162.5 mg loss |
|
Standard Color |
|
Black |
|
|
Track-Bed Lining for pick-up trucks |
|
|
Coating for OEM equipment with metal, wood, and plastic surfaces |
|
|
Coating of concrete structures for water/moisture resistance and structural reinforcement |
|
|
Coating of wood surface for protection of surface from physical and chemical damages |
|
|
Maritime and marine application |
|
|
Floor coating for physical protection of the surface and protection against oil, salt, water, and other chemicals |
This coating material can be sprayed on:
|
|
All metal surfaces |
|
|
Concrete, Mortar, and Stone Surfaces |
|
|
Wood Surfaces |
|
|
Fiberglass and plastic surfaces |
*See preparation methods for each surface
Go to Recommendation Page Index
Typical Processing Conditions:
| Process Parameter | Values | |
|
Mixing Ratio (By Volume) |
|
A: B = 1: 1 |
|
Gel Time |
|
5 Seconds |
|
Tack Free Time |
|
10 Seconds |
|
Complete Cure (at room temperature) |
|
24 hours |
|
Processing Temperature |
|
150 °F ( 65 °C) |
|
Recommended System Pressure |
|
1200 - 1500 psi (may vary depends on overture size and head design) |
|
Recommended Thickness (for truck bed lining application) |
|
1/8” or thicker |
Northstar Polymers, LLC
3444 Dight Avenue South
Minneapolis, MN 55406
Tel: 612.721.2911
E-Mail: info@northstarpolymers.com
Notice: All of the statements, recommendations, suggestions, and data concerning the subject material are based on our laboratory results, and although we believe the same to be reliable, we expressly do not represent, warrant, or guarantee the accuracy, completeness, or reliability of same, or the material or the results to be obtained from the use thereof, neither do we warrant that any such use, either alone or in combination with other materials, shall be free of the rightful claim of any third party by way of INFRINGEMENT or the like, and NORTHSTAR POLYMERS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY and FITNESS FOR A PARTICULAR PURPOSE.