The origin of Northstar Polymers is a polyurethane molder. From experience of over 30 years, we at Northstar Polymers have a tremendous amount of knowledge in heat-cure polyurethane production.

 Experienced professional polyurethane molders can rely on Northstar Polymers product quality, as well as delivery requirements. We have three large reactor tanks as well as one small tank for low quantity orders. Our high temperature cure polyurethane products have outstanding properties in taber abrasion, cut-and-tear, weight bearing, and wide applicable temperature.

 

High-temperature-cure polyurethane generally has better physical properties than room-temperature-cure systems. Typical applications of our heat cure polyurethane are:

 

 

High temperature cure urethane can be used in low-pressure enclosed mold and open casting. For graphic display of the properties of different elevated temperature cure system, please click on Here.

Introduction: Northstar Polymers, One Source Solution,Toll Production,Alternative Source ,Applications,Lab Our Products: Solid Urethane, Room Temperature Cure ,High Temperature Cure,Foam Polyurethane,Gel polyurethane,Sprayable , Product Selection Guide, Property Finders: Ambient Cure,High Temp. Cure,Foam More products Physical Properties of Extended Product Line Contact and Order: Let us know about you, Send E-mail, Manufacturers' Guide: , Equipment Consideration , Mixing Instructions, Mold Making Procedure, Recommended Readings ,Recommended gloves

 

Sending e-mail to Northstar Polymers

 

Northstar Polymers, Inc.

3444 Dight Ave. So., Minneapolis, MN 55406

Tel: 612-721-2911, Fax: 612-721-1009