We follow a simple protocol for naming of our products.  The following is an example of our naming protocol. 

Cast or Spray System

Example: MSS-A85A

First letter: the isocyanate used in the prepolymer (see codes below).

Second & third letters: the primary and secondary polyols in the system:

 

A

 

Aromatic or Aliphatic Amines

 

 

B

 

1,4, Butane Diol

 

 

 

 

G

 

Polytetramethylene Glycol Ethers

 

H

 

Hybrid

 

 

 

 

 

 

L

 

Ethylene and Diethylene Glycols

 

N

 

None

 

 

 

 

 

 

P

 

Polypropylene Glycol Ethers

 

 

S

 

Esters

 

 

 

 

 

The letter following the dash indicates the hardness scale as coded:

 

A

 

Shore A

 

 

D

 

Shore D

 

 

V

 

Shore OO

 

 

W

 

Shore OOO

The next two numbers indicate the hardness value on that scale.

The final letter is an index to allow for catalyst level and other variations.

 

 Notice: All of the statements, recommendations, suggestions, and data concerning the subject material are based on our laboratory results, and although we believe the same to be reliable, we expressly do not represent, warrant, or guarantee the accuracy, completeness, or reliability of same, or the material or the results to be obtained from the use thereof, neither do we warrant that any such use, either alone or in combination with other materials, shall be free of the rightful claim of any third party by way of INFRINGEMENT or the like, and NORTHSTAR POLYMERS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY and FITNESS FOR A PARTICULAR PURPOSE.

 

Introduction: Northstar Polymers, One Source Solution,Toll Production,Alternative Source ,Applications,Lab Our Products: Solid Urethane, Room Temperature Cure ,High Temperature Cure,Foam Polyurethane,Gel polyurethane,Sprayable , Product Selection Guide, Property Finders: Ambient Cure,High Temp. Cure,Foam More products Physical Properties of Extended Product Line Contact and Order: Let us know about you, Send E-mail, Manufacturers' Guide: , Equipment Consideration , Mixing Instructions, Mold Making Procedure, Recommended Readings ,Recommended gloves

 

Sending e-mail to Northstar Polymers

 

Northstar Polymers, LLC

3444 Dight Ave. So., Minneapolis, MN 55406

Tel: 612-721-2911, Fax: 612-721-1009